Pre-drive checks — fluids, lights, horn and visibility
Contents
A driver does not have to take the car apart or carry out a full workshop service before every journey. They should, however, know the basic vehicle components that directly affect safety and be able to notice an obvious fault.
The official practical training programme for Category B directly specifies a set of basic safety-related checks.
What does the official programme cover?
In the part concerning preparation for driving, it lists checking:
- the engine oil level,
- the coolant level,
- the brake fluid level,
- the presence of screenwash,
- the operation of the horn (audible warning device),
- the operation of the position/parking lights,
- the operation of the dipped-beam headlights,
- the operation of the main beam,
- the operation of the brake lights (“STOP”),
- the operation of the reversing lights,
- the operation of the indicators,
- the operation of the hazard warning lights,
- the operation of the rear fog light.
This is important: the list comes from the official practical training programme, not from a general list of good practices.
Does everything have to be checked every time the car is started?
The training list should not be turned into a false rule:
“The law requires all thirteen points to be checked one by one before every journey.”
The training programme sets out the skills that a candidate should acquire. The law, on the other hand, requires a vehicle taking part in traffic to be in good working order and safe.
In everyday use, how often checks are made also depends on:
- the manufacturer's instructions,
- the age and condition of the car,
- on-board messages,
- any symptoms noticed,
- the length of the planned journey.
Engine oil
Oil reduces friction and helps protect engine components.
In cars with a combustion engine, its level can be checked:
- with a traditional dipstick,
- with an electronic measuring system,
- in the way specified by the manufacturer.
Good practice: carry out the check in accordance with the owner's manual of the specific car. The required measuring conditions — e.g. engine temperature, the position of the vehicle or the time since the engine was switched off — may differ.
We do not teach one universal procedure for all models.
Coolant
The cooling system is responsible for maintaining the correct operating temperature of the engine and other components, depending on the design of the vehicle.
The coolant level can usually be assessed in the expansion tank using the manufacturer's markings.
Safety note: do not open a hot, pressurised cooling system unless the manufacturer allows it. Hot coolant and steam can cause serious burns.
This is a technical safety recommendation — the details of servicing a particular system come from the car's owner's manual.
Brake fluid
Brake fluid is part of the hydraulic braking system.
An incorrect level or a system warning may indicate a problem that needs checking.
The driver should not treat repeatedly topping up the fluid as a normal way of “fixing” a fault. If the level is incorrect or a warning appears, the cause must be established in accordance with the owner's manual and, if necessary, the vehicle should be checked at a workshop.
Screenwash
Running out of screenwash does not necessarily indicate a mechanical fault, but it can affect safety very quickly.
A dirty windscreen, road salt, mud or insects can reduce visibility to a level at which continuing to drive becomes dangerous.
That is why the presence of screenwash is included in the official programme of basic component checks.
Lighting
Lights serve the purpose of:
- illuminating the road,
- informing others of the vehicle's presence and behaviour.
When checking, what matters is not only whether a lamp “works”, but also whether it:
- is not covered,
- is not seriously damaged,
- is not so dirty that it cannot work properly,
- works as intended.
The rules for using the individual lights have already been covered in Module 4. Here we check that the device is in working order.
How do you check the brake lights?
The brake lights come on when the service brake is applied.
Their operation can be checked, e.g.:
- with the help of another person,
- by watching the light reflected off a suitable surface,
- by using the vehicle's diagnostic function, if the manufacturer has provided one.
There is no single statutory method of checking that applies to every car.
Horn
The horn is also one of the items listed in the official checking programme.
Checking that it works does not give you the right to use the horn for any purpose. The rules for using audible signals come from separate regulations and have been covered earlier.
Windows, wipers and mirrors
Although the official practical-training list specifically includes fluids, the horn and lights, everyday safety also requires attention to the driver's field of view.
Under Article 66(1) point 5 of Poland's Prawo o ruchu drogowym (the road traffic law) — except for a fully automated vehicle — the vehicle must provide the driver with a sufficient field of view and allow easy, convenient and reliable use of the devices for steering, braking, signalling and lighting the road while the driver simultaneously observes the road.
That is why, before driving, it is worth paying attention to:
- clean windows,
- de-icing and demisting of the windows,
- the condition of the wiper blades,
- the operation of the washers,
- the adjustment and condition of the mirrors,
- objects restricting visibility.
Electric and hybrid cars
Not every vehicle has the same set of fluids and maintenance tasks.
An electric car does not have conventional engine oil in the sense of a vehicle with a combustion engine, but it does have other systems that need checking in accordance with the manufacturer's instructions.
That is why the official list must be understood in a way appropriate to the design of the specific vehicle.
You should not artificially look for an “engine oil dipstick” in a car that does not have such a system.
Practical check before a longer journey
- whether there is any worrying leak under the vehicle,
- whether the tyres are clearly damaged or under-inflated,
- whether the windows and mirrors provide visibility,
- whether the wipers and washers work,
- whether the basic lights and indicators are working,
- whether a warning requiring a response remains on the instrument cluster,
- whether the required fluid levels are correct according to the manufacturer's procedure.
This is a practical checklist, not a literal rule requiring exactly these steps to be carried out before every journey.
Common pitfalls
1. “Training list = a statutory obligation to carry out the whole list every time before moving off.” — NO.
2. “If no warning light is on, the car never needs to be checked.” — NO.
3. “Every car has the same way of checking the oil and fluids.” — NO.
4. “The brake fluid can be topped up endlessly without looking for the cause.” — this may mask a problem.
5. “Running out of screenwash does not affect safety.” — it can seriously reduce visibility.
Remember
A CATEGORY B DRIVER SHOULD BE ABLE TO CHECK THE BASIC COMPONENTS AFFECTING SAFETY, BUT CHECKS AND SERVICING FOR A SPECIFIC CAR MUST ALWAYS REFLECT ITS DESIGN AND THE MANUFACTURER'S INSTRUCTIONS.
Sources
- Rozporządzenie Ministra Infrastruktury i Budownictwa z dnia 4 marca 2016 r. w sprawie szkolenia osób ubiegających się o uprawnienia do kierowania pojazdami, instruktorów i wykładowców — Annex No. 1:
- detailed practical training programme, point 1.1.1: “Checking the technical condition of basic vehicle components responsible for road safety”,
officialTopic 4.5: “Mechanical aspects related to road safety”.
- Ustawa z dnia 20 czerwca 1997 r. — Prawo o ruchu drogowym:
- Article 66(1) point 1 — the safety of a vehicle taking part in traffic,
- Article 66(1) point 5 — the driver's field of view and easy, convenient and reliable use of the steering, braking, signalling and road-lighting devices (except for a fully automated vehicle).
- Ustawa z dnia 21 listopada 2025 r. o zmianie ustawy — Prawo o ruchu drogowym oraz niektórych innych ustaw (Dz.U. 2025 poz. 1843) — Article 1 point 5: amendment of Article 66(1) point 5, in force from 24 June 2026.
