Passing oncoming vehicles and passing stationary vehicles or obstacles
Contents
Passing oncoming vehicles and passing stationary vehicles or obstacles are often confused with overtaking, although they concern different situations.
The law distinguishes them precisely:
- passing oncoming vehicles — passing a vehicle or road user travelling in the opposite direction,
- passing a stationary vehicle, road user or obstacle — passing a stationary vehicle, road user or obstacle.
For comparison:
- overtaking — passing a vehicle or road user travelling in the same direction.
The key question is therefore:
is the object moving, and if so, in which direction?
1. Passing oncoming vehicles — two vehicles travelling in opposite directions
A typical situation is:
- car A travels in one direction,
- car B approaches from the opposite direction,
- the vehicles pass each other.
Article 23(1) point 1 requires you when passing an oncoming vehicle to:
- keep a safe distance from the vehicle or road user,
- move to the right if necessary,
- reduce speed if necessary,
- and even stop if necessary.
There is no rule saying:
“if the mirrors fit, you can get through”.
The distance must be safe for the specific situation.
2. Safe distance when passing oncoming vehicles has no single statutory value
The law does not specify a universal number of centimetres or metres for ordinary passing of oncoming cars.
Adapt the distance to:
- road width,
- vehicle width,
- speed,
- type of verge,
- weather conditions,
- visibility,
- the presence of cyclists or pedestrians,
- possible deviation in the other vehicle's path.
Example
On a wide carriageway, two cars can pass freely.
On a narrow local road without a verge, it may be necessary to:
- slow down considerably,
- move as far right as possible,
- stop one of the vehicles.
3. Move to the right if necessary
When passing an oncoming vehicle, the driver must move to the right if the situation requires it.
This does not mean having to:
- drive into a ditch,
- hit the kerb,
- enter an impassable place,
- create a hazard for a pedestrian.
Moving right must be possible and safe.
If the road is too narrow:
→ the correct solution may be to reduce speed or stop.
4. Narrow road — do not force your way through
On a narrow carriageway, two vehicles may not be able to pass safely at the same time.
Drivers should then:
- observe the situation early,
- reduce speed,
- use a safe widening or passing place,
- not enter a narrowing if there is no room for both vehicles.
Do not apply rules such as:
“the larger vehicle has priority”
or:
“whoever arrives first always goes first”.
If signs determine priority at a narrowing, the signs decide.
5. B-31 — priority for oncoming traffic
The sign:
B-31 “priority for oncoming traffic”
prohibits entry onto a narrowed section of carriageway if doing so would force:
- drivers already on the narrowing, or
- drivers approaching it from the opposite direction
to stop.
In practice:
→ with B-31, you must wait if simultaneous passage is impossible without forcing the oncoming driver to stop.
6. D-5 — priority over oncoming traffic
On the opposite side of the narrowing there may be:
D-5 “priority over oncoming traffic”.
It means that road users on that side:
pass before drivers approaching from the opposite direction.
B-31 and D-5 usually work together:
- one side must give way,
- the other has priority.
Priority does not remove the need for caution
If an oncoming vehicle is already in the narrowing or the situation risks a collision:
→ do not enter simply because “I have D-5”.
Safety is more important than enforcing priority.
7. No B-31/D-5 — assess the actual situation
If a narrow section has no signs determining priority, drivers must apply:
- Article 23 on safely passing oncoming vehicles,
- general safety rules,
- correct road position.
Obstacle on your side
If a parked car, road works or another obstacle requires you to enter the part of the road used by oncoming traffic:
→ do not begin such a manoeuvre if it would create a conflict with a correctly travelling oncoming vehicle.
This is not a separate “magic obstacle-priority rule”, but a practical consequence of the duties to:
- keep a safe distance,
- avoid creating danger,
- correctly perform the manoeuvre of passing a stationary vehicle or obstacle.
8. Passing oncoming vehicles on a road without a centre line
The absence of a centre line does not mean that the whole width of the carriageway may be used freely.
Right-hand traffic applies.
When an oncoming vehicle approaches:
- use the right-hand part of the carriageway,
- reduce speed if necessary,
- keep a safe distance.
On a very narrow road, one vehicle may need to stop.
9. Passing a large oncoming vehicle
A bus or lorry:
- occupies more of the carriageway,
- may have greater body movement,
- creates a stronger air displacement,
- restricts visibility.
Therefore, when passing a large oncoming vehicle, particularly important are:
- lower speed,
- greater lateral distance,
- a stable path.
Do not rigidly maintain the maximum permitted speed if the width of the road does not justify it.
10. Passing a stationary vehicle or obstacle — the object is not moving
This occurs when you pass:
- a stationary vehicle,
- a stationary road user,
- an obstacle.
Examples
- a parked car,
- a vehicle immobilised by a breakdown,
- a container or obstacle on the carriageway,
- a vehicle stationary ahead while waiting to turn,
- a stationary road user near your path.
Article 23 requires you to:
- keep a safe distance,
- reduce speed if necessary.
11. A stationary car and classification of the manoeuvre
If the car ahead:
- is moving → passing it in the same direction is overtaking,
- is not moving → passing it is passing a stationary vehicle.
The classification may therefore depend on the vehicle's current state.
Example
A car has stopped while waiting to turn left.
You pass it.
→ you are passing a stationary vehicle, not overtaking.
12. Pass a stationary vehicle signalling a left turn only on the right
Article 23(1) point 2 expressly provides that:
a stationary vehicle signalling an intention to turn left may be passed only on its right-hand side.
Example
A car is stationary before an intersection and has its left indicator on.
It is waiting to turn.
→ if passing it is lawful and safe at all, pass it only on the right.
Do not attempt to pass on the left, towards the side into which it intends to turn.
13. Safe distance from a parked vehicle
When passing a parked car, consider more than its current position.
There may be:
- a door opening,
- the vehicle moving off,
- a pedestrian emerging from behind it,
- a child appearing,
- someone stepping between parked cars.
Your path should therefore leave a genuine safety margin.
If this requires partial entry into an adjacent lane:
→ first make sure the manoeuvre is permitted and safe.
14. Passing an obstacle may require a lane change
If an obstacle blocks part of your lane, passing it may also require:
- changing lanes, or
- partly entering an adjacent lane.
The lane-change rules in M3.4 then apply in addition to the rules on passing the obstacle.
Example
A broken-down car is stationary in the right-hand lane.
You want to pass it by moving into the left-hand lane.
→ give way to vehicles already travelling in the left-hand lane.
You cannot force them to brake merely because your lane is blocked.
15. Passing a stationary vehicle or obstacle and a solid line
The presence of an obstacle does not automatically permit you to cross a solid line.
If passing it would require breaching road markings:
→ assess the situation under the applicable rules and instructions from persons directing traffic.
Do not learn the rule:
“an obstacle always lets you cross a solid line”.
If traffic around the obstacle is controlled by an authorised person, that person's instructions may take precedence over signs.
16. Passing a bus stationary at a stop
A bus stationary at a stop is not moving, so passing it may constitute passing a stationary vehicle.
Pay particular attention to:
- pedestrians emerging from behind the bus,
- children,
- a pedestrian crossing,
- the bus intending to join traffic.
Built-up area
If a bus driver at a marked stop signals an intention to:
- change lanes, or
- enter the carriageway from a bay,
the special rules covered in M2.7 apply.
Do not thoughtlessly squeeze past a bus that is about to move off.
17. Never pass a vehicle stopped to give way to a pedestrian
Article 26(3) point 2 prohibits:
passing a vehicle that was travelling in the same direction but stopped to give way to a pedestrian.
This is one of the most important pedestrian-crossing prohibitions.
Typical situation
A road has two lanes in one direction.
Car A stops before a pedestrian crossing to let a pedestrian cross.
Car B is travelling in the adjacent lane.
→ B must not pass A across the crossing.
The pedestrian may be completely hidden by the stationary vehicle.
18. Not every stationary vehicle ahead means the same thing
If a vehicle is stationary:
- because of a red light,
- in a traffic jam,
- before a STOP sign,
- to give way to a pedestrian,
- to turn left,
in every case you are formally dealing with a stationary vehicle, but whether you may pass it depends on the complete traffic arrangements and specific rules.
Do not use the simplification:
“if it is stationary, I can pass it”.
You must check:
- why it is stationary,
- whether the lines permit passage,
- whether it is before a pedestrian crossing,
- whether traffic lights apply,
- whether you would enter an oncoming lane,
- whether there is safe space.
19. Passing near a pedestrian crossing — the greatest risk is a hidden person
A car stationary near a pedestrian crossing may hide:
- a pedestrian already on the crossing,
- a pedestrian entering the crossing,
- a child.
Therefore, even if you are not sure why another car has slowed or stopped:
→ exercise particular caution and do not assume that the road ahead of it is clear.
On multilane roads this is one of the most dangerous situations.
20. Passing a breakdown or road works
If there is on the carriageway:
- a broken-down car,
- a works machine,
- a barrier,
- another obstacle,
begin passing it only after checking:
- oncoming traffic,
- traffic in the adjacent lane,
- lines,
- temporary signs,
- instructions from persons directing traffic.
Road works
A person authorised to direct traffic may give instructions that take precedence over signals and signs to the extent provided by the rules.
Do not rely solely on permanent lines from before the temporary traffic arrangements were introduced.
21. Yellow markings at road works
Temporary traffic arrangements may use yellow road markings.
If yellow and white markings indicate different paths:
→ follow the yellow markings.
This is particularly important when passing road works because the old lane path may still be visible on the surface.
22. Passing oncoming vehicles and stationary vehicles or obstacles in restricted visibility
In:
- fog,
- heavy precipitation,
- darkness,
- a sharp bend,
- where a large vehicle blocks your view
reduce speed enough to perform the manoeuvre safely.
Fog outside a built-up area
Article 30 imposes a special duty on a motor-vehicle driver:
when overtaking or passing a stationary vehicle, road user or obstacle, give short horn signals.
This is a specific exception for driving in reduced air transparency outside a built-up area.
23. Passing an oncoming pedestrian or cyclist
The definition of passing oncoming vehicles covers not only vehicles.
You may also pass a road user travelling in the opposite direction.
For example, this may be:
- a cyclist,
- a pedestrian lawfully using the carriageway.
Keep a safe distance and adapt your speed appropriately.
There is no statutory “minimum 1 m” for ordinary passing of an oncoming cyclist equivalent to the rule for overtaking a cyclist.
This does not permit passing dangerously close.
24. Passing a stationary pedestrian or other road user
The statutory definition of passing a stationary vehicle, road user or obstacle also covers a stationary road user.
During such a manoeuvre, take particular account of the possibility of sudden movement by that person.
Do not assume that a pedestrian standing near the edge:
- will definitely remain still,
- can see the car,
- will not step backwards or sideways.
Speed and distance must allow you to react.
25. Do not use the verge as a lane for passing a traffic jam
The verge is not an ordinary extra traffic lane for a passenger car.
Driving along the verge past a stationary queue cannot be treated as automatically lawful “passing of stationary vehicles”.
You must take into account:
- the purpose of the verge,
- signs and markings,
- vehicle-position rules,
- pedestrians and other authorised users.
26. Passing a stationary vehicle or obstacle and entering the opposite lane
If an obstacle is in your lane and passing it requires partial or complete entry onto the part of the carriageway for oncoming traffic:
before the manoeuvre, make sure that:
- you do not breach lines or signs,
- no oncoming vehicle will have its safe passage impeded,
- you have sufficient visibility,
- you can return to your own part of the carriageway.
Do not cut it fine when starting the manoeuvre.
27. Passing oncoming vehicles at a narrowing controlled by signals or a person
At temporary narrowings, traffic may be alternated by:
- traffic light signals,
- an authorised person.
Do not apply the B-31/D-5 rule independently if current instructions from a person or traffic light signals organise traffic differently.
The hierarchy remains:
person directing traffic → traffic light signals → signs
28. Do not confuse “safe distance” with “priority”
Article 23 requires a safe distance when passing oncoming vehicles and when passing stationary vehicles, road users or obstacles.
This does not automatically create special priority for one party.
Priority at a narrowing may result from:
- B-31,
- D-5,
- traffic light signals,
- an instruction from a person directing traffic.
Without such regulation, the basis is to perform the manoeuvre safely and without creating conflict.
How to tell overtaking, passing oncoming vehicles and passing stationary vehicles or obstacles apart?
Vehicle travelling in the same direction
→ OVERTAKING
Vehicle approaching from the opposite direction
→ PASSING AN ONCOMING VEHICLE
Vehicle stationary
→ PASSING A STATIONARY VEHICLE OR OBSTACLE
This is the simplest pattern to remember.
SAME DIRECTION → overtaking
OPPOSITE DIRECTION → passing an oncoming vehicle
NOT MOVING → passing a stationary vehicle or obstacle
Step-by-step method for passing oncoming vehicles
Step 1 — assess the road width
Can both vehicles pass safely at the same time?
Step 2 — check the signs and markings
B-31, D-5, narrowing, lines, traffic lights.
Step 3 — reduce speed if necessary
Do not pass the other vehicle at an unnecessarily high speed.
Step 4 — move to the right if necessary and safe
Step 5 — if there is no room, stop
Do not force your way through.
Step-by-step method for passing stationary vehicles or obstacles
Step 1 — establish why the object is stationary
Especially important near a pedestrian crossing or intersection.
Step 2 — check the signs and markings
Lines, prohibitions, lanes, temporary traffic arrangements.
Step 3 — check traffic behind, beside and ahead
Passing may require a lane change.
Step 4 — keep a safe distance
Allow for doors opening or a pedestrian appearing.
Step 5 — reduce speed if the situation requires it
Step 6 — after passing, return smoothly to the correct path
Common pitfalls
1. Overtaking, passing oncoming vehicles and passing stationary vehicles or obstacles are three different manoeuvres.
2. When passing an oncoming vehicle, move right, slow down or stop if necessary.
3. B-31 means you must give way to oncoming traffic on a narrowed section if entering would force it to stop.
4. D-5 means priority over oncoming traffic on a narrowed section.
5. An obstacle on your side does not give you the right to force your way into the path of an oncoming vehicle.
6. When passing a stationary vehicle or obstacle, keep a safe distance and reduce speed if necessary.
7. A stationary vehicle signalling a left turn may be passed only on the right.
8. You must not pass a vehicle stopped to give way to a pedestrian.
9. A stationary bus may hide a pedestrian — the fact that it is not moving does not itself make passing safe.
10. An obstacle does not automatically permit you to cross a solid line.
11. If passing requires a lane change, the lane-change rules also apply.
12. The minimum 1 m applies, among other things, when overtaking a cyclist; it is not a universal statutory value for ordinary passing of an oncoming cyclist.
Sources
- Ustawa z dnia 20 czerwca 1997 r. — Prawo o ruchu drogowym:
- Article 2 point 26 — definition of passing oncoming vehicles,
- Article 2 point 27 — definition of passing a stationary vehicle, road user or obstacle,
- Article 2 point 28 — definition of overtaking,
- Article 23(1) point 1 — duties when passing oncoming vehicles,
- Article 23(1) point 2 — duties when passing stationary vehicles or obstacles and a vehicle signalling a left turn,
- Article 26(3) point 2 — prohibition on passing a vehicle stopped to give way to a pedestrian,
- Article 30 — special rules in reduced air transparency.
- Rozporządzenie w sprawie znaków i sygnałów drogowych:
- § 25 — B-31 “priority for oncoming traffic”,
- § 46 — D-5 “priority over oncoming traffic”.
- Current consolidated text of the road traffic law: Dz.U. 2024 poz. 1251, as subsequently amended.
- Annex No. 1 to the training programme — part
officialTopic 1.13.
