Category BM11.5
Lesson 5 of 5

A loaded car — effects on driving and checks before moving off

Contents

The regulations say what may be carried and how the load must be secured. A safe driver should also understand that the same car behaves differently when it is empty and when it is carrying a full complement of passengers and heavy luggage.

This links the legal requirements with driving technique.

The load affects the safe speed

Article 19 of Poland's Prawo o ruchu drogowym (the road traffic law) requires the driver to choose a speed that ensures control of the vehicle, taking into account, among other things:

  • the condition of the road,
  • visibility,
  • weather conditions,
  • traffic volume,
  • the condition and load of the vehicle.

So it is not enough to say:

“I'm driving below the limit, so my speed is definitely safe.”

The same bend may require a different speed when the car is heavily loaded or has a heavy load on the roof.

Greater mass changes the car's behaviour

A loaded vehicle has greater inertia.

In practice, this may mean:

  • slower acceleration,
  • a greater load on the braking system,
  • the need to start braking earlier,
  • a greater load on the tyres and suspension,
  • different behaviour during a sudden change of direction.

This does not mean that you can apply one universal conversion factor such as “a full car brakes X metres longer”. The actual result depends on many factors.

A load placed high up raises the centre of gravity

Heavy luggage on the roof can increase body roll and reduce the stability margin during:

  • taking a bend quickly,
  • a sudden lane change,
  • crosswinds.

That is why a heavy load should — if possible — be carried lower down, and a roof box should be used in accordance with the manufacturer's recommendations.

A full car may require adjustments

Before a journey with a heavy load, it is worth consulting the vehicle owner's manual for:

  • the recommended tyre pressure at full load,
  • the permissible axle load,
  • the maximum roof load,
  • headlight levelling, if the vehicle requires manual adjustment,
  • the parameters of the roof rack or towbar.

These are requirements and recommendations that depend on the specific vehicle, which is why we do not give one universal value for all cars.

The lights and the plate must remain visible

After loading the car, you need to check again whether:

  • the rear lights are not obscured,
  • the indicators are visible,
  • the registration plate remains legible,
  • any protruding load has been properly marked.

This applies in particular to bike platforms, large carriers and items carried on the outside.

Checks after setting off

The mounting may work loose as a result of:

  • vibration,
  • uneven surfaces,
  • the movement of the suspension,
  • a soft load settling into a different position.

That is why, when carrying a larger or unusual load, it is good practice to stop in a safe place after setting off and check the mountings again, and then to check them periodically during the rest of the journey.

This is a practical recommendation, not a rule laying down a statutory obligation to stop after a specific number of kilometres.

Passengers also change the load

Four adults and their luggage can make up a considerable part of the car's permissible payload.

So when assessing the load, you must not count only the suitcases.

Before a longer journey, it is worth taking into account:

  • the number and weight of the people,
  • the luggage,
  • the roof box and its contents,
  • bikes and their mountings,
  • additional equipment.

Checks before moving off — a practical routine

1. PEOPLE Is the number of passengers consistent with the number of seats? Is everyone properly secured?

2. MASS Is there any risk of exceeding the maximum authorised mass (MAM) or the payload?

3. DISTRIBUTION Are the heavy items stable, and are they positioned so that they do not compromise vehicle stability?

4. SECURING Is the load secured against shifting or falling off?

5. VISIBILITY Can the driver see the road, and are the lights and the plate uncovered?

6. DIMENSIONS Does the protruding load stay within the permissible limits, and has it been marked?

7. VEHICLE PARAMETERS Have the tyre pressure, roof, roof box and other relevant items been checked against the manufacturer's instructions?

8. DRIVING STYLE Does the driver take the extra mass into account when accelerating, braking and cornering?

What is the law, and what is good technique?

Legal requirements

Among other things:

  • not exceeding the MAM and the payload,
  • maintaining vehicle stability,
  • not hindering driving,
  • not restricting visibility or obscuring the required markings,
  • securing the load against shifting,
  • observing the dimensions and the rules for marking a protruding load,
  • adjusting speed to the condition and load of the vehicle as well.

Good technique and journey organisation

Among other things:

  • placing heavy items low down,
  • checking the mountings after setting off,
  • using the manufacturer's tyre pressure tables for full load,
  • driving a heavily loaded car more gently,
  • allowing a larger braking margin.

These practical recommendations should not be presented as additional articles of the law.

Common pitfalls

1. “Passengers don't count as part of the car's load.” — NO.

2. “If I don't exceed the MAM, the load distribution doesn't matter.” — NO. The law also requires vehicle stability to be maintained and the vehicle to be driven safely.

3. “Once the luggage is secured, there's no need to check it again.” — mountings can work loose; checking is good practice.

4. “The speed limit is the only criterion for choosing a speed.” — NO. Article 19 also requires the condition and load of the vehicle to be taken into account.

5. “ESC/ABS systems eliminate the problem of extra mass.” — NO. These systems assist the driver within the limits of physics, but they do not eliminate inertia or the effects of poor load distribution.

Remember

A CORRECTLY LOADED CAR IS NOT JUST A CAR THAT IS “NOT OVERLOADED”. LOAD DISTRIBUTION, SECURING, VISIBILITY AND THE WAY YOU DRIVE ALSO MATTER.

Sources
  • Ustawa z dnia 20 czerwca 1997 r. — Prawo o ruchu drogowym:
    • Article 19(1) — the condition and load of the vehicle as factors in choosing a speed,
    • Article 60(1) point 2 — the prohibition on obscuring lights, signalling devices and registration plates,
    • Article 61(1) and Article 61(2) points 1–4 — mass, axle loads, stability, driving and visibility,
    • Article 61(3)–(4) — securing the load,
    • Article 61(6)–(10) — the dimensions and marking of a protruding load,
    • Article 66(1) — vehicle safety.
  • Rozporządzenie Ministra Infrastruktury i Budownictwa z dnia 4 marca 2016 r. w sprawie szkolenia osób ubiegających się o uprawnienia do kierowania pojazdami, instruktorów i wykładowców — Annex No. 1, officialTopic 4.1: “Safety factors relating to the vehicle, load and persons carried; responsibility of the driver/vehicle keeper”.
↑