Seat belts and head restraints
Contents
Seat belts and head restraints are among the basic elements of a car's passive safety.
They do not help prevent the accident itself in the way that, for example, correct braking or the ABS system does. Their primary purpose is to limit the consequences when a collision has already occurred.
The most important legal rule is:
the driver of a motor vehicle and a person carried in such a vehicle equipped with seat belts must use those belts while the vehicle is moving.
The duty therefore applies not only to the driver and front passenger, but also to passengers in the rear seats if the relevant seat is equipped with a seat belt.
1. A seat belt is not only protection against “being thrown out of the car”
A three-point seat belt is intended to keep the body in as controlled a position as possible during:
- a frontal collision,
- a side collision,
- an impact to the rear of the vehicle,
- a rollover,
- sudden braking.
It helps limit movement of the body relative to:
- the steering wheel,
- the dashboard,
- the windscreen,
- other passengers,
- the car's interior.
A correctly fastened seat belt works together with:
- the pretensioner,
- the load limiter,
- the airbag,
- the seat,
- the head restraint.
Do not treat these elements as substitutes for one another.
2. An airbag does not replace a seat belt
A common incorrect way of thinking is:
“the car has airbags, so the seat belt is not that important”.
Airbags are designed as a supplement to the restraint system, not as an alternative to a correctly fastened seat belt.
The belt helps keep the body in the position for which the airbag's operation was designed.
Therefore:
airbag + seat belt + correct seating position
work together.
3. The duty also applies to the rear seat
A passenger sitting in the rear should also use a seat belt if the seat is equipped with one.
There is no rule saying:
“you do not need to wear seat belts in the back”.
In a severe collision, an unrestrained rear-seat passenger can move with very high energy and pose a danger:
- to themselves,
- to passengers sitting in front,
- to other people in the car.
Therefore, everyone travelling in the vehicle should be properly restrained before the journey begins.
4. An adult passenger has their own duty, but the driver cannot ignore the problem either
Article 39 of Poland's Prawo o ruchu drogowym (the road traffic law) imposes the duty to use a seat belt on both:
- the driver,
- and a person being carried.
At the same time, Article 45(2) point 3 prohibits the driver from:
carrying a passenger in a manner inconsistent with Article 39.
The driver should therefore not begin or continue driving while knowing that a passenger who is subject to the duty is not using a seat belt.
Practical rule
Before moving off:
→ the driver fastens their own seat belt and makes sure the passengers are properly restrained.
5. How should a three-point seat belt be positioned correctly?
A correctly fastened seat belt should:
- lie as flat against the body as possible,
- not be twisted,
- have no unnecessary slack.
Lap section
It should run:
low across the hips / pelvis, not high across the soft part of the abdomen.
Shoulder section
It should run:
across the middle of the shoulder and the chest.
It should not:
- slip off the shoulder,
- run under the arm,
- be routed behind the back.
If the car has height adjustment for the upper belt anchorage:
→ adjust it to the person's height.
6. The seat belt must not be twisted
Twisted seat-belt webbing:
- distributes forces over the body less effectively,
- may create localised pressure,
- may operate less correctly in a collision.
After fastening the belt, it is worth checking:
- whether the webbing lies flat,
- whether the buckle is properly latched,
- whether the belt has caught on clothing or part of the seat.
7. Remove excessive slack
The seat belt should lie against the body.
Thick:
- jackets,
- coats,
- padded clothing
may increase the slack between the body and the belt.
Good practice is to arrange clothing and the belt so that the webbing lies as close to the body as possible.
After fastening it, you can gently tighten the shoulder section to remove unnecessary slack.
Do not modify the belt mechanism or use unapproved clips intended to loosen it artificially.
8. Do not route the belt under your arm
Routing the shoulder belt:
- under the arm,
- behind the back
may seem more comfortable, but prevents the system from operating correctly.
The shoulder belt is intended to control movement of:
- the upper torso,
- the chest,
- the shoulder.
If it is under the arm or behind the back:
→ it does not perform its function as designed.
9. The seat should be adjusted before driving begins
Correct operation of the seat belt and head restraint also depends on the person's position.
The driver should adjust the seat so that they can:
- operate the pedals freely and confidently,
- hold the steering wheel without overextending the arms,
- keep their back stably supported,
- see the road and instruments,
- allow the seat belt to run correctly.
A backrest reclined too far may impair how the body works with the seat belt.
Do not drive in a semi-reclined position.
10. Why does seating position matter?
The vehicle's safety system assumes that the passenger is:
- on the seat,
- in the correct position,
- wearing a seat belt.
Unusual behaviours such as:
- sitting sideways,
- reclining the backrest heavily,
- resting the legs on the dashboard,
can radically change how the following operate:
- the seat belt,
- the airbag,
- the head restraint.
A seat belt therefore does not operate independently of correct body position.
11. A head restraint is a safety feature, not merely a comfort feature
A head restraint is not simply a “cushion for your head”.
Its purpose is to limit sudden movement of the head relative to the torso, particularly when the rear of the car is struck.
Without adequate support, the head may be thrown back sharply while the torso is already being moved with the seat.
This may increase the risk of injuries to:
- the neck,
- the cervical spine.
12. The head restraint should not be positioned at neck level
A typical mistake:
the head restraint is set very low, so its upper part is at neck level.
In this position, the head does not receive adequate support.
Safe adjustment
Adjust the head restraint so that:
- its surface is behind the head, not behind the neck,
- the top of the head restraint is as close as possible to the level of the top of the head,
- the distance between the head and the head restraint is as small as possible while maintaining a correct seating position.
The aim is not to press your head firmly into the head restraint during normal driving.
The aim is to position it so that the head receives support quickly in a collision.
13. Adjust the seat first, then the head restraint
The correct sequence is:
- adjust the seat distance,
- adjust the seat height if the car allows it,
- adjust the backrest,
- adjust the head restraint,
- adjust the steering wheel,
- adjust the mirrors,
- fasten and adjust the seat belt.
Changing the backrest angle may change the position of the head relative to the head restraint.
Therefore, do not adjust the head restraint in isolation from the driver's overall position.
14. Head restraints are technically required in typical modern cars
The technical rules require head restraints on each outer front seat of, among other vehicles, passenger cars covered by the relevant type-approval requirements and first-registration date.
For passenger cars first registered after 31 December 1995, the national rules require the outer front seats to be equipped with head restraints.
A modern passenger car may of course also have head restraints:
- in the centre rear seat,
- on all seats.
Important for the driver
If a head restraint is provided for a particular seat:
→ it should be correctly fitted and adjusted for the person sitting there.
15. Do not remove a head restraint just to “see better”
Removing a head restraint from an occupied seat solely because it restricts rearward visibility is a poor solution.
Visibility should primarily be improved by:
- correctly adjusting the mirrors,
- adopting the correct driving position,
- using a camera if the vehicle has one.
The head restraint performs a protective function and its absence may increase the passenger's risk of neck injury.
16. Who is exempt from the duty to use seat belts?
Article 39(2) contains a closed list of exemptions.
The duty does not apply, among others, to:
1. a person holding the appropriate medical certificate
confirming a contraindication to the use of seat belts;
2. a woman who is visibly pregnant;
3. a taxi driver
while carrying a passenger;
4. an instructor or examiner
during instruction or examination;
5. specified officers and members of the armed forces
in the service situations specified by law;
6. a medical team
while providing medical assistance;
7. an escort
while transporting valuables;
8. an ill person or a person with a disability
being carried on a stretcher or in a wheelchair;
and cases of carrying children on public transport specified by law.
17. An exemption applies to a specific situation — not to the whole person “forever”
Some exemptions apply only when the exact condition is met.
Taxi driver
The exemption applies to the taxi driver:
while carrying a passenger.
It does not give a taxi driver a general right always to drive without a seat belt.
Instructor
The exemption applies to the instructor:
during instruction.
Examiner
The exemption applies to the examiner:
during examination.
The precise wording of the exemption therefore matters.
18. A learner driver is not automatically exempt because they are driving a driving-school car
Article 39 lists:
- the instructor,
- the examiner
during the relevant activities.
It does not establish a general exemption for the person being trained on that basis.
Typical situation
A learner driver is driving a driving-school car equipped with a seat belt.
→ they use the seat belt in accordance with the general rule.
This is a good driving-test pitfall:
an “L-plate car” does not mean that everyone in the car is exempt from wearing seat belts.
19. A taxi passenger is not exempt merely because they are travelling in a taxi
The exception in Article 39(2) point 3 applies to:
a taxi driver while carrying a passenger.
It is not a general exemption for the taxi passenger from using a seat belt.
If the passenger is subject to the ordinary duty and the seat is equipped with a seat belt:
→ they should use it.
Separate exceptions concerning child seats are discussed in M4.6.
20. A medical certificate must be an actual document provided for by law
It is not enough to say:
“the seat belt is uncomfortable” or “a doctor once told me not to wear it”.
The law refers to:
a medical certificate confirming a contraindication to the use of seat belts.
The rules also specify the information required in such a document.
In the course, we do not need to memorise the entire certificate template, but you must understand that this is a formal exemption provided for by law.
21. Seat belts also apply on short journeys
The duty does not depend on:
- the length of the journey,
- the speed planned by the driver,
- driving “only around the neighbourhood”,
- whether the driver knows the road.
There is no exemption saying:
“I am only driving 500 metres, so I do not need to wear a seat belt”.
An accident or sudden braking can also occur at low speed and over a very short distance.
22. Fasten seat belts before moving off
The rule requires seat belts to be used while driving.
The safest and most logical sequence is therefore simple:
- adopt the correct seating position,
- adjust the seat and head restraint,
- fasten the seat belt,
- only then begin driving.
Do not move off and then, after several hundred metres, try to fasten the seat belt with one hand.
This:
- distracts attention,
- reduces control of the vehicle,
- means the earlier part of the journey was unrestrained.
23. The seat belt must correspond to the occupied seat
Do not:
- fasten your belt into the buckle belonging to the neighbouring seat,
- route one belt across two people,
- use makeshift extensions not provided for by the manufacturer,
- modify the retractor mechanism.
Each seating position has its own restraint system designed for one person.
24. An unrestrained passenger can endanger others
In a collision, a person without a seat belt does not remain stationary in their seat.
Their body moves because of inertia.
A rear-seat passenger may strike:
- the back of a front seat,
- the driver,
- the front passenger.
Fastening a seat belt is therefore not merely an individual decision about one's own safety.
It affects the safety of everyone in the car.
25. Seat belts, head restraint and position form one system
Before moving off, it is worth carrying out a simple check:
Seat
- stable position,
- comfortable access to the pedals and steering wheel.
Head restraint
- behind the head,
- appropriate height,
- as small a distance from the head as possible.
Seat belt
- lap section low,
- shoulder section across the middle of the shoulder,
- not twisted,
- no unnecessary slack.
Only this combination allows the car's safety design to be used in the way it was intended.
Step-by-step method before setting off
Step 1 — adjust the seat
Obtain a stable position and full control of the vehicle.
Step 2 — adjust the head restraint
Not behind the neck — behind the head.
Step 3 — fasten the seat belt
Check the buckle and the routing of the webbing.
Step 4 — remove twists and slack
Lap section low on the pelvis, shoulder section across the shoulder and chest.
Step 5 — check the passengers
Are the people subject to the duty wearing their seat belts?
Step 6 — only then move off
Common pitfalls
1. The duty to use seat belts applies to the driver and to passengers, including those in the rear seat, if their seats are equipped with seat belts.
2. An airbag does not replace a seat belt.
3. The lap belt should run low across the hips, not high across the abdomen.
4. The shoulder belt should run across the middle of the shoulder — not under the arm and not behind the back.
5. Twisted or very loose webbing impairs correct seat-belt operation.
6. The head restraint should support the head, not sit low behind the neck.
7. A taxi driver is exempt only while carrying a passenger — the taxi passenger does not automatically gain an exemption as a result.
8. An instructor and examiner have a statutory exception during instruction or examination; the learner driver is not automatically exempt as a result.
9. Driving over a very short distance does not exempt anyone from wearing seat belts.
10. The driver should not carry a passenger in a manner inconsistent with Article 39.
11. A camera, airbags and modern safety systems do not eliminate the need to adjust the seat, head restraint and seat belt correctly.
Sources
- Ustawa z dnia 20 czerwca 1997 r. — Prawo o ruchu drogowym:
- Article 39(1) — duty of the driver and a person being carried to use seat belts,
- Article 39(2) — exemptions from the duty to use seat belts,
- Article 39(5)–(6) — requirements concerning medical certificates,
- Article 45(2) point 3 — prohibition on carrying a passenger in a manner inconsistent with Article 39.
- Rozporządzenie w sprawie warunków technicznych pojazdów oraz zakresu ich niezbędnego wyposażenia:
- requirements concerning seats, seat belts and anchorage points,
- requirement for outer front seats to be equipped with head restraints for passenger cars covered by the rule and first registered after 31 December 1995.
- Policja — educational materials concerning the correct use of seat belts:
- lap belt low across the hips,
- shoulder belt over the middle of the shoulder,
- webbing lying flat and unnecessary slack being limited,
- combined operation of the seat belt, head restraint and airbag.
- Annex No. 1 to the training programme —
officialTopic 1.18.
