Category BM1.3
Lesson 3 of 9

Prohibitory signs

Contents

Prohibitory signs introduce a specific restriction or forbid a particular type of behaviour. They may concern, among other things:

  • entering a road,
  • the movement of certain types of vehicle,
  • vehicle dimensions or mass,
  • turning and U-turns,
  • overtaking,
  • speed,
  • stopping and parking,
  • pedestrian traffic.

Recognising the symbol is not enough on its own. With a prohibitory sign you must always establish where the prohibition starts, whom it applies to and where it ends.

Where does the prohibition start?

As a rule, a prohibitory sign:

  • applies on the road where it has been placed,
  • applies from the point where the sign is placed,

unless the rule for a specific sign provides otherwise.

The following supplementary plates may be placed below the sign:

  • T-20 — indicates the length of the road section covered by the restriction,
  • T-21 — indicates the distance to where the restriction begins or applies.

T-20

Indicates the length of the road section covered by the restriction.

T-21

Indicates the distance to where the restriction begins or applies.

The sign or the supplementary plate may also show the days or hours when the prohibition applies.

A prohibition may apply to a larger area

If a prohibitory sign is placed together with a sign marking the start of a town or village, a built-up area or a traffic zone, the regulations may extend its effect to the whole of that area, up to the corresponding sign marking the end of the area — unless the prohibition is changed or cancelled by another sign along the way.

This is why you cannot always assume that a prohibition ends at the first intersection.


1. No traffic and no entry

B-1 “no traffic in either direction”

Means that vehicles, as well as columns of pedestrians, riders and drovers, are prohibited from travelling on the road.

The key words are “in either direction”. The prohibition applies to entering the road from every side marked in this way.

A supplementary plate reading “Does not apply to...” may be placed below the sign, indicating the vehicles exempt from the prohibition.

B-2 “no entry”

Means that entry to the road or carriageway is prohibited from the side on which the sign has been placed.

This is the essential difference:

  • B-1 prohibits traffic on the marked road,
  • B-2 prohibits entry from a specific side.

2. Prohibitions concerning specific vehicles

This group includes:

  • B-3 — no motor vehicles except two-wheeled motorcycles,
  • B-3a — no buses,
  • B-4 — no motorcycles,
  • B-5 — no goods vehicles,
  • B-6 — no agricultural tractors,
  • B-7 — no motor vehicles with trailers,
  • B-8 — no horse-drawn vehicles,
  • B-9 — no bicycles,
  • B-10 — no mopeds,
  • B-11 — no cycle carts,
  • B-12 — no handcarts.

B-3

No entry for motor vehicles, except two-wheeled motorcycles.

B-3a

No entry for buses.

B-4

No entry for motorcycles.

B-6

No entry for agricultural tractors.

B-8

No entry for horse-drawn vehicles.

B-10

No entry for mopeds.

B-11

No entry for cycle carts.

B-12

No entry for handcarts.

B-5 — an important pitfall concerning mass

Without an additional value, sign B-5 covers, among others, goods vehicles with a maximum authorised mass (MAM) exceeding 3.5 t, as well as the tractors and slow-moving vehicles specified in the regulations.

If a mass is shown on sign B-5 or on a supplementary plate below it, it refers to the maximum authorised mass of the vehicle or combination of vehicles.

This must be distinguished from sign B-18, where the actual total mass is what counts.

B-7 — trailer

B-7 prohibits the movement of motor vehicles towing a trailer or trailers, but the regulations provide an exception for a vehicle with a single-axle trailer or a semi-trailer.

If a mass value is shown on B-7 or on a supplementary plate, it refers to the maximum authorised mass of the trailer and, with two trailers, to the sum of their masses.

B-9 — bicycle

B-9 prohibits bicycles on the carriageway and the verge.

Do not automatically extend the meaning of this sign to every part of the road without checking the rules that apply to the place where you are.


3. Vehicles carrying dangerous goods

Signs:

  • B-13 — no vehicles carrying explosive or highly flammable goods,
  • B-13a — no vehicles carrying dangerous goods,
  • B-14 — no vehicles carrying goods that may pollute water.

B-13

No entry for vehicles carrying explosive or highly flammable goods.

B-13a

No entry for vehicles carrying dangerous goods.

B-14

No entry for vehicles carrying goods that may pollute water.

These signs concern specific transport operations that are subject to the rules on the carriage of dangerous goods by road.

At Category B level, the most important thing is to recognise the meaning of these signs correctly and to be aware that their scope depends on the type and quantity of goods carried.

Note: detailed ADR classes are beyond the scope of this lesson.


4. Prohibitions based on dimensions, mass and axle load

B-15 — width

“No entry for vehicles wider than ... m”

When comparing with the value on the sign, the width of the vehicle including its load is taken into account.

B-16 — height

“No entry for vehicles over ... m high”

The height of the vehicle including its load is taken into account.

B-17 — length

“No entry for vehicles longer than ... m”

It applies to a vehicle or a combination of vehicles and takes into account the length including the load.

B-18 — actual total mass

“No entry for vehicles with an actual total mass over ... t”

What counts is the actual mass of the vehicle at that moment.

For a combination of vehicles, their combined actual mass is what matters.

B-19 — axle load

“No entry for vehicles with an axle load greater than ... t”

It does not refer to the total mass of the vehicle, but to the load exerted by the vehicle’s axle or axles.

Remember the difference

  • B-5 with a mass value → maximum authorised mass,
  • B-18 → actual total mass,
  • B-19 → axle load.

5. B-20 “STOP”

B-20 formally belongs to the group of prohibitory signs, but it performs a particularly important function related to priority.

It means:

  1. no entry into the intersection without stopping before the priority road,
  2. an obligation to give way to drivers travelling on the priority road.

Where must you stop?

If a stopping place has been marked, you must stop the vehicle exactly there.

If no stopping place has been marked, you should stop at a point from which you can make sure that you will not obstruct traffic on the priority road.

B-20 may also be used before tracks used by rail vehicles or at other places where traffic flows cross.

Remember: simply driving past the sign very slowly does not fulfil the obligation. B-20 requires you to stop.

We cover the detailed use of B-20 at intersections in the module on priority.


6. Turn and U-turn prohibitions

B-21 “no left turn”

Prohibits turning left at the next intersection.

It also prohibits making a U-turn.

This is a very important difference compared with B-23.

B-22 “no right turn”

Prohibits turning right at the next intersection.

B-23 “no U-turn”

Prohibits U-turns from the point where the sign is placed up to and including the next intersection.

It does not prohibit turning left as such.

B-24 “end of U-turn prohibition”

Cancels the U-turn prohibition before the intersection.

The key difference

  • B-21 → you must not turn left or make a U-turn at the intersection covered by the sign,
  • B-23 → you must not make a U-turn, but turning left as such is not prohibited by this sign.

7. No overtaking

B-25 “no overtaking”

Prohibits drivers of motor vehicles from overtaking multi-track motor vehicles.

This wording matters. The sign does not simply mean “no overtaking of anything at all”.

The scope of the sign may be modified by a supplementary plate showing the type of vehicle to which the prohibition applies.

B-26 “no overtaking by goods vehicles”

Applies to certain heavy vehicles specified in the regulations, in particular goods vehicles with a maximum authorised mass exceeding 3.5 t, tractor units and certain special-purpose vehicles.

B-27

End of the overtaking prohibition introduced by B-25.

B-28

End of the prohibition on overtaking by goods vehicles introduced by B-26.

The detailed rules on the overtaking manoeuvre itself, including the prohibitions that arise directly from the Act, are covered in M3.7 — Overtaking.


8. Audible warning signals

B-29 “no use of audible warning signals”

Prohibits the use of an audible warning signal.

There is, however, an important exception: you may use it if this is necessary to warn of an immediate threat to road safety.

B-30

Marks the end of the prohibition introduced by sign B-29.


9. B-31 “give priority to oncoming traffic”

Sign B-31 concerns a narrowed section of carriageway.

You must not enter the narrowed section if doing so would force either of the following drivers to stop:

  • a driver already on the narrowed section, or
  • a driver approaching it from the opposite direction.

The sign does not mean that the driver must always stop before the narrowing. The prohibition on entry applies when entering would create the traffic conflict described in the regulation.


10. B-32 — obligation to stop for a specified reason

The basic name of sign B-32 is “Stop — customs”.

The sign requires you to stop the vehicle.

Depending on the situation, it may also carry other inscriptions, for example:

  • “Border control”,
  • “Barrier damaged”,
  • “Traffic signals out of order”,
  • “Ferry boarding”,
  • “Roadside check”,
  • “Toll collection”.

If no separate stopping place has been marked, you must stop the vehicle before the sign. You may continue only with the consent of an authorised person or after receiving a signal permitting you to proceed.


11. Speed limit

B-33 “speed limit”

Prohibits exceeding the speed shown on the sign.

The limit may end, among other things, with:

  • a different speed introduced by another B-33 sign,
  • entry into a speed limit zone marked with B-43,
  • sign D-40 “residential zone”,
  • the relevant sign marking the start or end of a built-up area,
  • sign B-34,
  • sign B-42,
  • and, in cases specified in the regulations, the next intersection.

The next intersection — an important exception

For B-33, as for several other prohibitory signs, the next intersection may end the prohibition if it has not been cancelled earlier.

However, this does not apply in the specific situation on a dual carriageway where a side road joins only from the left and has no connection with the carriageway you are travelling on.

B-34 “end of speed limit”

Cancels the limit introduced by sign B-33.

We cover the general speed limits for particular roads and vehicles in the lessons on speed. Here we focus on how the sign works.


12. Stopping and parking

B-35 “no parking”

Prohibits parking a vehicle.

If the sign or supplementary plate shows a permitted immobilisation time longer than one minute, parking is allowed within the time indicated.

B-36 “no stopping”

Prohibits stopping a vehicle.

It is therefore more restrictive than B-35.

Which side of the road does it apply to?

B-35 and B-36 apply to the side of the road on which they have been placed, except at places where other signs or markings permit stopping or parking.

These prohibitions do not apply to a vehicle immobilised because of:

  • traffic conditions, or
  • applicable regulations.

For example, stopping at a red signal is not a breach of B-36.

T-24 — vehicle removal

A T-24 supplementary plate below B-35 or B-36 indicates that a vehicle left where the prohibition applies will be removed from the road at the owner’s expense.

With signs B-35, B-36, B-37 and B-38, the following supplementary plates may be used:

T-25a

Start of the restriction.

T-25b

Continuation of the restriction.

T-25c

End of the restriction.

B-37

No parking on odd-numbered dates.

B-38

No parking on even-numbered dates.

A particularly important rule:

neither prohibition applies from 21:00 to 24:00.

Among other things, this makes it possible to move the vehicle to the other side of the road before the next day begins.


13. Restricted parking zone

B-39

Marks the entrance to a restricted parking zone.

The prohibition applies on all roads within the zone, not just on the street where the sign stands.

If the sign shows a permitted immobilisation time longer than one minute, parking is allowed within that limit.

The regulations provide exceptions, among others for appropriately marked parking spaces and for certain public transport vehicles.

B-40

Marks the end of the restricted parking zone.

Remember: an intersection inside the zone does not automatically mean the end of the zone.


14. B-41 “no pedestrians”

Prohibits pedestrian traffic on the side of the road on which the sign has been placed.

It is not a general prohibition on pedestrians being on both sides of the entire road.


15. Speed limit zone

B-43

Marks the entrance to a zone in which the maximum speed shown on the sign applies on all roads.

If B-43 shows a speed of 30 km/h or less, traffic-calming devices and measures within the zone need not also be marked with warning signs.

B-44

Marks the exit from the speed limit zone.

Important: a zone works differently from a single B-33 sign. Intersections within the zone do not cancel the limit. It applies until the exit marked with B-44 or until the traffic arrangements are changed accordingly.


16. B-42 “end of restrictions”

B-42 does not cancel every possible prohibitory sign.

It cancels the prohibitions introduced by signs:

  • B-23 — no U-turn,
  • B-25 — no overtaking,
  • B-26 — no overtaking by goods vehicles,
  • B-29 — no use of audible warning signals,
  • B-33 — speed limit.

This is one of the most important pitfalls in this group of signs.

B-42 does not mean “the end of all prohibitory signs”.


When does an intersection cancel a prohibition?

If no appropriate ending sign has been used earlier, the prohibitions expressed by the following signs, among others, apply up to the next intersection:

  • B-25,
  • B-26,
  • B-29,
  • B-33,
  • B-35,
  • B-36,
  • B-37,
  • B-38.

However, this rule cannot be applied automatically to all Group B signs.

For example:

  • B-21 and B-22 apply specifically to the next intersection,
  • B-23 covers the section up to and including the next intersection,
  • B-39 and B-43 work as zone signs,
  • B-1 and B-2 have their own nature and scope.

Common pitfalls

1. B-1 and B-2 do not mean the same thing. B-1 prohibits traffic in either direction; B-2 prohibits entry from the side where the sign stands.

2. B-21 also prohibits U-turns. B-23 prohibits only U-turns.

3. B-5 and B-18 use different concepts of mass. B-5 with a value refers to the maximum authorised mass; B-18 refers to the actual total mass.

4. B-25 does not prohibit overtaking every road user. The regulation refers to drivers of motor vehicles overtaking multi-track motor vehicles.

5. B-36 does not prohibit stopping that is forced by traffic or by the regulations.

6. B-37 and B-38 do not apply from 21:00 to 24:00.

7. B-42 does not cancel all prohibitions.

8. An intersection does not end every form of restriction. In particular, distinguish a single B-33 sign from a B-43 zone.


Full list of Group B signs covered in this lesson

Show the full list of signs
SignMeaning
B-1no traffic in either direction
B-2no entry
B-3no motor vehicles except two-wheeled motorcycles
B-3ano buses
B-4no motorcycles
B-5no goods vehicles
B-6no agricultural tractors
B-7no motor vehicles with trailers
B-8no horse-drawn vehicles
B-9no bicycles
B-10no mopeds
B-11no cycle carts
B-12no handcarts
B-13no vehicles carrying explosive or highly flammable goods
B-13ano vehicles carrying dangerous goods
B-14no vehicles carrying goods that may pollute water
B-15no vehicles wider than the value shown
B-16no vehicles over the height shown
B-17no vehicles longer than the value shown
B-18no vehicles with an actual total mass over the value shown
B-19no vehicles with an axle load greater than the value shown
B-20STOP
B-21no left turn
B-22no right turn
B-23no U-turn
B-24end of U-turn prohibition
B-25no overtaking
B-26no overtaking by goods vehicles
B-27end of overtaking prohibition
B-28end of overtaking prohibition for goods vehicles
B-29no use of audible warning signals
B-30end of prohibition on audible warning signals
B-31give priority to oncoming traffic
B-32Stop — customs / other specified reasons for stopping
B-33speed limit
B-34end of speed limit
B-35no parking
B-36no stopping
B-37no parking on odd-numbered dates
B-38no parking on even-numbered dates
B-39restricted parking zone
B-40end of restricted parking zone
B-41no pedestrians
B-42end of restrictions
B-43speed limit zone
B-44end of speed limit zone
T-20length of the road section covered by the restriction
T-21distance to where the restriction begins or applies
T-24vehicle removal
T-25astart of the restriction
T-25bcontinuation of the restriction
T-25cend of the restriction
Sources
  • Rozporządzenie Ministrów Infrastruktury oraz Spraw Wewnętrznych i Administracji z dnia 31 lipca 2002 r. w sprawie znaków i sygnałów drogowych — in particular § 15–34.
  • Consolidated text: Dz.U. 2019 poz. 2310, as subsequently amended.
  • Annex No. 1 to the rozporządzenie w sprawie szkolenia osób ubiegających się o uprawnienia do kierowania pojazdami — part officialTopic 1.2.
↑