Category BM11.3
Lesson 3 of 5

Loads — mass, distribution and securing

Contents

Even an ordinary passenger car can carry a load of considerable mass:

  • suitcases,
  • shopping,
  • sports equipment,
  • tools,
  • furniture,
  • building materials,
  • items carried on the roof or on an external carrier.

The way a load is carried is not just a matter of keeping the car tidy; it directly affects safety.

You must not exceed the maximum authorised mass, the payload or the permissible axle loads

Article 61 of Poland's Prawo o ruchu drogowym (the road traffic law) requires that:

  • the load must not cause the maximum authorised mass (MAM) or the permissible payload of the vehicle to be exceeded,
  • the load distribution must not cause the permissible axle loads of the vehicle on the road to be exceeded.

The vehicle's load does not consist only of the items in the boot. The following also count:

  • the driver,
  • the passengers,
  • the luggage,
  • equipment and other things carried

— in accordance with the parameters specified for the particular vehicle.

So you cannot assume that because the luggage physically fits in the car, carrying it is automatically permissible.

The load must not compromise vehicle stability

The regulations require the load to be placed so that it does not compromise vehicle stability.

Heavy items placed high up or on one side can change:

  • the position of the centre of gravity,
  • the behaviour in a bend,
  • the response during a sudden lane change,
  • the load on individual axles and wheels.

Good practice: place heavy items as low and as stably as possible, and plan the load distribution so as not to create unnecessary asymmetric loading.

This is not a rule prescribing one particular arrangement for every suitcase. It is a practical application of the requirement to maintain vehicle stability.

The load must not hinder driving

You must not arrange items in a way that hinders:

  • turning the steering wheel,
  • using the pedals,
  • changing gear,
  • using the parking brake,
  • access to other devices needed for driving.

An item lying near the pedals can slide during braking and prevent them from being used properly.

That is why a loose bottle, can or other item in the driver's footwell can be a real hazard.

The load must not restrict visibility

The law prohibits placing the load in a way that:

  • restricts the driver's view of the road,
  • obscures the lights,
  • obscures the signalling devices,
  • obscures the registration plates or other required markings.

A large item in the boot or on the rear seat can therefore be a problem even if it is light, if it restricts the required field of view or interferes with safe driving.

The load must be secured against shifting

Article 61 requires the load to be secured so that it does not:

  • shift,
  • cause excessive noise.

The load-securing devices must also be secured against:

  • working loose,
  • hanging loose,
  • falling off while driving.

So it is not enough that an item “probably won't move”.

You need to take into account the forces acting during:

  • braking,
  • a sudden turn,
  • swerving around an obstacle,
  • a collision.

A loose item becomes a hazard

During sudden braking, an unsecured item continues its movement relative to the car.

It may:

  • hit a passenger,
  • fall into the driver's space,
  • damage a window,
  • shift in a way that destabilises the vehicle.

This also applies to items that seem light.

How should you pack luggage in practice?

Good practice is to:

  1. place heavy items low down,
  2. stabilise them so that they cannot slide sideways or forwards,
  3. use the anchorage points provided by the manufacturer,
  4. not place heavy items loose on the parcel shelf above the boot,
  5. not leave items in the area around the pedals,
  6. with folding seat backs, take into account that the load may shift into the passenger compartment.

These are practical ways of fulfilling the legal obligation to distribute and secure the load properly.

Luggage on the roof

A roof rack or roof box increases carrying capacity, but it does not remove the vehicle's limits.

You need to take into account:

  • the maximum roof load specified by the manufacturer,
  • the maximum load of the roof rack or roof box itself,
  • the vehicle's maximum authorised mass,
  • correct mounting,
  • the increased height of the car,
  • the change in the vehicle's behaviour and its sensitivity to crosswinds.

The manufacturer's limits are parameters of the specific vehicle and equipment, not one common statutory value for all cars.

Bike carrier and external items

A bike, roof box or other item carried on the outside must not obscure the required lights, signalling devices or registration plate.

If the carrier covers the vehicle's rear registration plate, an additional legalised registration plate is used to mark the carrier, placed on the carrier in the location designed for it.

If the design of the carrier obscures the required lights or signalling devices, it must not be used in a way that leaves them obscured.

Common pitfalls

1. “If the luggage fits inside, the car cannot be overloaded.” — NO.

2. “A small item doesn't need to be secured.” — its mass is not the only factor determining the risk.

3. “The load may cover the rear of the vehicle if I have a reversing camera.” — the camera does not override the visibility and marking requirements.

4. “Securing straps may hang loose if the load itself is stable.” — the load-securing devices must also be secured.

5. “A roof box has one statutory limit for every car.” — NO. You need to check the parameters of the specific car and equipment.

Remember

THE LOAD MUST BE PERMISSIBLE AND STABLE, MUST NOT HINDER DRIVING OR VISIBILITY, AND MUST BE SECURED AGAINST SHIFTING.

Sources
  • Ustawa z dnia 20 czerwca 1997 r. — Prawo o ruchu drogowym:
    • Article 19(1) — when adjusting speed, the condition and load of the vehicle, among other things, are taken into account,
    • Article 60(1) point 2 — the prohibition on obscuring lights, signalling devices and registration plates,
    • Article 61(1) — maximum authorised mass and permissible payload,
    • Article 61(2) point 1 — permissible axle loads,
    • Article 61(2) points 2–4 — vehicle stability, hindering driving, restricting visibility, and obscuring lights, signalling devices and plates,
    • Article 61(3)–(4) — securing the load and the load-securing devices,
    • Article 66(1) — vehicle safety requirements.
  • Rozporządzenie Ministra Infrastruktury z dnia 8 listopada 2024 r. w sprawie rejestracji i oznaczania pojazdów, wymagań dla tablic rejestracyjnych oraz wzorów innych dokumentów związanych z rejestracją pojazdów — § 8, § 26(5) and § 33(9): an additional registration plate to mark a carrier that covers the rear plate.
  • Rozporządzenie Ministra Infrastruktury i Budownictwa z dnia 4 marca 2016 r. w sprawie szkolenia osób ubiegających się o uprawnienia do kierowania pojazdami, instruktorów i wykładowców — Annex No. 1, officialTopic 4.1: “Safety factors relating to the vehicle, load and persons carried; responsibility of the driver/vehicle keeper”.
↑