Category BM7.2
Lesson 2 of 6

Moving off, stopping and pedal control

Contents

Moving off and stopping a car smoothly look like simple actions, but they require several elements to be coordinated at the same time:

  • observation of the surroundings,
  • correct use of the brake,
  • correct metering of the accelerator,
  • clutch work — if the car has a manual gearbox,
  • releasing or applying the parking brake,
  • keeping full control of the vehicle.

Good technique is not about making movements “from memory”.

The driver should understand what happens to the car when each pedal is used and why they are carrying out a given action.

In this lesson we deal mainly with a Category B passenger car.

At the same time, we clearly separate:

  • requirements arising from the legal rules,
  • training and test criteria,
  • good technical practice.

1. What does the official training programme cover?

In the theoretical training programme, topic officialTopic 2.9 has a broad name:

“Vehicle control techniques”.

The detailed practical training programme for Category B develops this area through, among other things:

  • starting the vehicle's engine,
  • switching on the lights appropriate for driving in road traffic,
  • making sure it is possible to drive,
  • assessing the situation around the vehicle,
  • moving off smoothly,
  • driving forwards and in reverse along a traffic lane,
  • stopping the vehicle before the end and the beginning of the traffic lane,
  • moving off forwards on an uphill gradient.

We will develop the last of these topics in detail in M7.5.

Here we focus on basic control of the car when moving off, driving at low speed and stopping.


2. The practical exam also requires moving off smoothly

In the current Category B practical exam criteria, the task in the manoeuvring area includes, among other things:

  1. starting the vehicle's engine,
  2. switching on the appropriate lights, if they do not come on automatically,
  3. making sure it is possible to drive,
  4. assessing the situation around the vehicle,
  5. moving off smoothly,
  6. driving smoothly forwards and in reverse along a traffic lane,
  7. stopping correctly at the designated place.

For a vehicle with a manual gearbox, the criterion for moving off smoothly specifies:

  • releasing the parking brake, if it is applied,
  • releasing the clutch gently,
  • increasing engine speed.

This is a specific test criterion.

However, it does not mean that the road traffic rules require one identical foot movement in every car.

Cars differ, among other things, in:

  • clutch characteristics,
  • engine torque,
  • the way the accelerator pedal works,
  • whether a moving-off assistance system is fitted,
  • the type of gearbox,
  • the way the parking brake works.

3. Before you move off, make sure you can do so

Simply setting the car in motion is not yet moving off correctly.

Before you start driving, you must assess the situation around the vehicle.

In particular, check:

  • what is in front of the car,
  • whether there is a pedestrian or cyclist beside the vehicle,
  • whether another vehicle is approaching from behind,
  • whether there is a child or another person nearby whom you may not be able to see directly,
  • whether moving off will create a hazard,
  • whether you have room to make the intended movement.

Depending on the situation, you use:

  • direct observation,
  • the mirrors,
  • turning your head to check the area not visible in the mirrors,
  • camera and sensor systems — as an aid, not as the only source of information.

First the possibility of driving safely, only then the pedal movement.


4. Moving off after parking may be joining traffic

Poland's Prawo o ruchu drogowym (the road traffic law) uses the concept of joining traffic.

Joining traffic takes place, among other situations, when starting to drive:

  • after parking,
  • after a stop that did not result from traffic conditions or traffic rules.

A driver joining traffic must:

  • take particular caution,
  • give way to other vehicles and road users.

Example

A car is parked at the right-hand edge of the carriageway.

The driver wants to move off and join the stream of vehicles travelling alongside.

It is not enough to:

  • switch on the indicator,
  • put the car in gear,
  • start driving.

You also have to make sure that you can carry out the manoeuvre without forcing other road users to give way to you.

The detailed rules on joining traffic were covered earlier. Here we combine them with the technique of moving off correctly.


5. Not every time you move off again is “joining traffic”

This is an important distinction.

If you stopped because:

  • the light turned red,
  • you were held up in a traffic jam,
  • you were giving way,
  • the stop resulted from traffic conditions or a traffic rule,

then starting to drive again does not, for that reason, become joining traffic within the meaning of Article 17.

Example

You are the third car waiting at a red light.

When the light turns green, you move off behind the vehicle in front.

This is not the same legal situation as pulling out of a parking space at the edge of the carriageway.

Of course, you must still:

  • observe your surroundings,
  • keep an appropriate distance,
  • move off safely.

6. Three pedals in a car with a manual gearbox

In a typical car with a manual gearbox, the driver has:

  1. the clutch — on the left,
  2. the brake — in the middle,
  3. the accelerator pedal — on the right.

Each of them has a different function.

Clutch

It allows the drive between the engine and the gearbox to be disengaged temporarily and engaged gradually.

Brake

It is used to reduce speed and to stop the vehicle.

Accelerator pedal

It allows the driver to control the demand for drive torque and to increase the vehicle's speed according to the current gear and driving conditions.

We will cover changing gear in detail and the use of engine braking in M7.3.


7. The typical division of footwork in a manual car

In correct driving technique in a car with a manual gearbox, the following division is usually adopted:

  • the left foot operates the clutch,
  • the right foot operates the brake and the accelerator pedal.

This is not a legal rule establishing a statutory “allocation of feet”.

It is an established technique that allows:

  • consistent operation of the pedals,
  • a quick change from accelerating to braking,
  • fewer cases of accidentally pressing the wrong pedals at the same time.

When you have finished using the clutch, your left foot should be able to rest away from the pedal.


8. Do not keep your left foot resting on the clutch

Once the drive is fully engaged, the clutch pedal should be released.

Constantly resting your foot on the clutch may put unnecessary pressure on the mechanism and make it harder to feel the moment when you really want to use the clutch.

Good practice is to:

  • use the clutch when it is needed,
  • after finishing, move your left foot to the rest provided for it or to the floor.

This is a technical and maintenance principle, not a separate statutory obligation.


9. What is the clutch “biting point”?

As you slowly release the clutch, you reach the range in which the drive starts to be transmitted gradually to the wheels.

This is commonly called:

the clutch biting point.

At that moment you may notice, among other things:

  • a slight change in engine sound,
  • a change in engine speed,
  • a slight tendency of the car to start moving,
  • a change in load that the driver can feel.

In different cars, the clutch may “bite”:

  • lower,
  • higher,
  • over a shorter,
  • over a longer part of the pedal travel.

This is why you should not learn one foot position in centimetres.

Learn to recognise how the particular car responds.


10. Moving off smoothly in a manual car — the basic sequence

In a typical situation on a level surface, you can use the following pattern:

Step 1 — prepare the drive

With the vehicle stationary, select the right gear for moving off — as a rule, first gear.

Step 2 — observe your surroundings

Make sure that moving off is safe and permitted.

Step 3 — start engaging the drive

Slowly release the clutch to the range in which the car starts to respond.

Step 4 — meter the accelerator

Apply only as much accelerator as you need to move off smoothly.

Step 5 — keep releasing the clutch

Do not let it out suddenly.

Allow the drive to engage smoothly.

Step 6 — once moving, release the clutch completely

When the drive is fully engaged, take your foot off the clutch.

This is a technical pattern.

The actual amount of accelerator and the rate of clutch release depend on the vehicle and the situation.


11. Not every car needs the same amount of accelerator when moving off

A petrol, diesel or hybrid engine and different control systems may respond differently.

Some cars:

  • move off easily with very little accelerator,
  • automatically raise the engine speed slightly as the clutch is released,
  • require more deliberate use of the accelerator pedal.

This is why the following rule should not be taught:

“always set exactly a specified engine speed”.

In correct technique, what matters is the effect:

  • moving off should be controlled,
  • the engine should not be revved unnecessarily high,
  • the vehicle should not lurch forwards.

12. Releasing the clutch too quickly

If the clutch is released too abruptly with insufficient drive torque, the car may:

  • jerk,
  • slow down sharply,
  • stall.

This is the most common mistake made by novice drivers.

However, the solution is not excessive revving of the engine.

First you need to learn to engage the clutch smoothly with appropriate, moderate metering of the accelerator.


13. Holding the clutch at the biting point for too long is also a technical error

When moving off, a short period of partial clutch engagement is natural.

However, the car should not be held at the biting point for a long time without need.

This may lead to:

  • a rise in the temperature of the clutch components,
  • faster wear,
  • imprecise control of the vehicle.

It is particularly wrong to hold the car on a hill for a long time solely by balancing the clutch and the accelerator pedal.

We will cover hill starts separately in M7.5.


14. The parking brake when moving off

If the parking brake is applied, it must be released at the right moment when moving off.

In a conventional mechanical system, the driver does this by hand.

In a car with an electric parking brake, the system may:

  • require manual release with a button, or
  • release automatically once the conditions specified by the manufacturer are met.

Do not assume that every car behaves in the same way.

Before driving an unfamiliar vehicle, it is worth knowing how its parking brake works.


15. A car with an automatic gearbox requires different footwork

In a car without a clutch pedal, the driver usually has:

  • the brake pedal,
  • the accelerator pedal.

In standard technique, both pedals are operated with the right foot.

The left foot is kept away from the pedals.

Why?

Because a driver used to a manual gearbox may instinctively press the wide brake pedal with the left foot, as they used to press the clutch.

This can cause very sharp braking.

Operating the brake and the accelerator with the right foot is good driving-technique practice — not a separate road traffic rule.


16. Basic moving off in an automatic car

How the selector is operated depends on the design of the car, but in a typical vehicle, before moving off:

  1. you start or activate the drive system according to the vehicle's instructions,
  2. you hold the vehicle on the brake,
  3. you select the correct driving mode, e.g. D,
  4. you check your surroundings,
  5. you release the brake in a controlled way,
  6. if necessary, you press the accelerator pedal smoothly.

Some cars start to creep forward very slowly after the brake is released, without the accelerator pedal being used.

Others — particularly some electric vehicles — may behave differently depending on the drive system settings.

This is why you always need to know the characteristics of the particular vehicle.


17. An electric car may not give the usual sign that the engine is running

In an electric vehicle, the absence of combustion-engine noise does not mean that the car is not ready to drive.

After the drive has been activated, the vehicle may indicate readiness by a message such as:

  • READY,
  • an appropriate warning light,
  • information on the screen.

Before changing the selector position or releasing the brake, you must be sure that you understand the state of the vehicle.

You must not rely on your hearing alone.


18. One foot, two adjacent pedals — build a consistent habit

With the brake and the accelerator pedal, a consistent movement of the right foot is important.

The driver should learn, without looking:

  • where the brake is,
  • where the accelerator pedal is,
  • how to move the foot quickly from one to the other.

Do not look down at the pedals while driving.

Your attention should be directed above all at the road and your surroundings.

This is why the correct seat adjustment covered in M7.1 was so important.


19. Accelerate smoothly

The accelerator pedal does not work like an “on/off” switch.

The pressure on it should be metered.

Pressing it sharply and unnecessarily may:

  • cause a jerk,
  • make it harder to keep your distance,
  • reduce the smoothness of traffic flow,
  • increase fuel or energy consumption,
  • reduce grip on a slippery surface.

This does not mean that you always have to accelerate very slowly.

Sometimes a brisk increase in speed is needed, e.g. when joining traffic.

Correct technique means:

as much acceleration as the situation requires — without unnecessary abruptness.


20. Braking during normal driving should be predictable

The road traffic law requires the driver to brake in a way that does not cause:

  • a hazard to road safety,
  • an obstruction to traffic.

In a normal situation, braking technique should therefore be as smooth and predictable as possible.

Most often it looks like this:

  1. you notice early enough that you need to reduce speed,
  2. you lift off the accelerator,
  3. you move your foot to the brake,
  4. you gradually increase brake pressure to the level the situation requires,
  5. as the speed falls, you monitor your surroundings and the behaviour of the vehicle.

Emergency braking is a different situation — there the priority is to stop the car as quickly and safely as possible.

We covered emergency braking technique and how ABS works in M6.2.


21. Do not press the clutch automatically at the start of every braking manoeuvre

In a manual car, a common mistake is to press both of the following immediately at the same time:

  • the clutch,
  • the brake

whenever you reduce speed, even slightly.

During typical braking you can first:

  • lift off the accelerator,
  • start braking,
  • leave the drive engaged,
  • press the clutch when it is needed to stop or to match the gear.

This lets you use the natural resistance of the drivetrain and keep control of the drive transmission.

There is no single statutory moment, defined by a specific speed, at which the clutch must always be pressed.

It depends on:

  • the gear selected,
  • the speed,
  • the characteristics of the engine,
  • whether the vehicle is to stop completely or only slow down.

We will develop this in detail in M7.3 in connection with engine braking and changing gear.


22. When bringing a manual car to a complete stop, the clutch must be disengaged before the engine stalls

If the car is to stop completely, the clutch must be pressed at a sufficiently low speed so that the engine does not labour and stall.

A typical sequence during a calm stop may look like this:

lift off the accelerator → braking → clutch at the right moment → complete stop

However, do not teach one identical clutch point for all cars.

The aim is to:

  • keep the stop smooth,
  • maintain control,
  • prevent the engine from stalling,
  • avoid driving for an unnecessarily long time with the clutch pressed.

23. Stopping an automatic car

In a typical car with an automatic gearbox, when stopping:

  1. you take your right foot off the accelerator pedal,
  2. you move it to the brake,
  3. you increase the pressure smoothly,
  4. you bring the vehicle to a stop,
  5. you keep the car from moving on its own.

During a short stop in traffic — e.g. at traffic lights — how the vehicle is held may depend on the design of the car and the manufacturer's recommendations.

There is no general rule requiring an automatic gearbox to be shifted into N or P at every red light.

What matters most is that the vehicle:

  • remains under control,
  • does not roll unintentionally,
  • is ready to continue safely.

24. In a vehicle with regenerative braking, simply lifting off the accelerator may slow the car sharply

In electric cars and some hybrids, the driver can use regenerative braking.

After the accelerator pedal is released, the car may:

  • only lose speed slightly, or
  • slow down very strongly,

depending on the system settings.

This does not change the driver's basic obligation:

you must keep control of your speed and use the service brake when necessary.

One-pedal driving may reduce how often the brake pedal is used, but it does not mean that the driver can stop being ready to brake immediately.


25. After stopping, secure the car against moving on its own

After stopping, the car must not on its own:

  • roll forwards,
  • roll backwards,
  • move off after a pedal is released accidentally.

Depending on the situation, you use:

  • the service brake,
  • the parking brake,
  • the appropriate gearbox or selector position.

We will cover how to secure the vehicle when parking in more detail in M7.5 and in Module 12 in the context of the vehicle's technical condition and equipment.


26. A short stop and a longer wait are not the same technical situation

During a stop of a few seconds in traffic, the driver may remain ready to move off quickly.

During a longer wait, it is worth reducing unnecessary leg tension and load on the drivetrain components.

In a manual car this may mean — depending on the situation — selecting neutral and securing the vehicle appropriately with the brake.

However, it is not correct to present this as one mandatory legal pattern for every stop.

Above all, the driver must:

  • keep control of the car,
  • not allow it to move unintentionally,
  • be ready to continue safely.

27. Move off only when the vehicle in front is actually pulling away

In a traffic jam and at traffic lights, it is easy to make the mistake of moving off only because:

  • the light signal has changed,
  • the brake lights of the car in front have gone out,
  • the driver expects the traffic to start moving any moment.

Before releasing the brake, make sure you have enough space in front of you.

This helps you avoid:

  • running into the car in front,
  • sudden braking again,
  • unnecessary “creeping” with a minimal gap.

28. Do not look only at the car directly in front of you

When moving off in town traffic, it is worth observing the situation further ahead of the vehicle.

If you can see that traffic is stopping again a few cars ahead, you can:

  • move off more gently,
  • lift off the accelerator earlier,
  • reduce unnecessary accelerating and braking.

This improves smoothness and reduces the risk of a late reaction.

This is good observation and driving-technique practice, not a separate legal rule specifying how far ahead to look.


29. Stalling the engine should not cause panic

A novice driver may stall the engine when moving off.

The most important things then are to:

  1. keep control of the car,
  2. hold the brake if necessary,
  3. secure the vehicle against rolling,
  4. restart the engine according to the vehicle's design,
  5. check the situation around you,
  6. move off again only when it is safe to do so.

Do not try to “rescue” the situation with chaotic pedal movements.

A technical error becomes dangerous above all when the driver stops observing the surroundings or loses control of the vehicle.


30. If the car does not move off as usual — do not simply press the accelerator harder

If the vehicle does not behave correctly when you try to move off, there may be many causes:

  • the parking brake is still applied,
  • the wrong gear,
  • the wrong selector position,
  • releasing the clutch too quickly,
  • an obstacle under a wheel,
  • a technical fault.

Do not solve every such situation by pressing the accelerator pedal harder.

First establish the cause.

An unnecessary increase in drive torque may make the vehicle lurch forward once the cause of the resistance is removed.


31. Moving off abruptly on a slippery surface reduces control

On snow, ice, a wet carriageway or a loose surface, accelerating too abruptly may cause the driven wheels to lose grip.

This is why moving off should be even smoother.

Modern traction control systems can limit wheelspin, but they do not change the basic principle:

the driver must still adapt the way they use the pedals to the available grip.

We covered grip in detail in Module 6.


32. Footwear must not hinder pedal operation

The regulations do not specify one mandatory type of footwear for driving a passenger car.

From the point of view of driving technique, however, footwear should allow:

  • a secure foot position,
  • a feel for the pedal,
  • quick movement of the right foot between the accelerator and the brake,
  • full depression of the clutch in a manual car.

Footwear that:

  • slips off the foot,
  • catches on the adjacent pedal,
  • has a very thick or unstable sole,

may hinder precise control.

This is a technical, safety-related assessment, not a legal rule defining a particular type of footwear.


33. Do not use the pedals as on/off switches

A novice driver often treats the pedals like switches:

  • accelerator — pressed or released,
  • brake — hard or not at all,
  • clutch — to the floor or released at once.

Yet most normal driving requires metering.

Good control of the car means that the foot movement is:

  • deliberate,
  • smooth,
  • proportionate to the vehicle response required.

The exception is an emergency, in which the brake may need to be used immediately and very decisively.


34. Smoothness must not be more important than safety

The aim of driving technique is to drive the car smoothly, but not at any price.

If a sudden hazard appears:

  • do not brake less firmly just because you want to avoid a jerk,
  • do not continue moving off just because you have already started releasing the clutch,
  • do not try to maintain “perfect smoothness” when you need to stop the vehicle immediately.

Safety takes precedence over comfort.


35. A correct stop ends with full control of the vehicle

A stop is not complete just because the speed is 0 km/h.

The driver should also make sure that:

  • the vehicle remains stationary,
  • it is not rolling,
  • the chosen way of holding the car is appropriate for the situation,
  • they can safely continue driving or end the journey.

On a slope, this stage is even more important.

We will develop hill starts and precise manoeuvring at very low speed in M7.5.


36. Manual and automatic — the main differences

ElementManual gearboxAutomatic gearbox
Clutchoperated with the left footno clutch pedal
Brakeright footright foot — standard technique
Acceleratorright footright foot — standard technique
Moving offrequires coordination of the clutch and drive torqueonce the driving mode is selected, mainly the brake and accelerator are controlled
Engine stall due to poor clutch controlpossibletypically does not occur in this way
Rolling after the brake is releaseddepends on clutch control and the gradientmay occur automatically, depending on the design
Regenerative brakingusually absent or of little significance in a conventional drivetrainmay be very noticeable in a hybrid or EV

The table describes typical technique and vehicle characteristics.

It does not replace the instructions for a particular car.


37. What does “moving off smoothly” mean in the exam?

In exam practice, the point is that the vehicle starts to move in a controlled way.

Among other things, the candidate should:

  • assess the situation around the vehicle beforehand,
  • not move off in a way that creates a hazard,
  • release the parking brake if it is applied,
  • in a manual car, engage the clutch smoothly with an appropriate increase in engine speed,
  • keep the correct path,
  • stop the vehicle at the required place.

It is not about putting on a “show”.

You do not have to move off quickly.

You have to move off confidently, smoothly and under full control.


38. A simple mental sequence before moving off

Instead of memorising only the foot movements, you can use a simple pattern:

observation → decision → preparing the drive → controlled moving off → continued observation

Observation

Can I move off?

Decision

Do I have priority and enough space?

Preparing the drive

Have I selected the right gear or driving mode?

Controlled moving off

Is the car responding as I intended?

Continued observation

Has the situation changed since I started moving?

This last question is particularly important.

The traffic situation can change within one second.


Common pitfalls

1. Simply setting the car in motion is not enough. Before moving off, you must assess whether you can drive safely and check the vehicle's surroundings.

2. Moving off after parking may be joining traffic. In that case, Article 17 requires particular caution and giving way to other road users.

3. Moving off after a red light or after stopping in a traffic jam does not, for that reason, count as joining traffic again.

4. In a manual car, the typical technique is: left foot — clutch; right foot — brake and accelerator. This is driving technique, not a separate legal rule specifying an “allocation of feet”.

5. Do not keep your left foot resting on the clutch.

6. The clutch biting point is not in the same place in every car.

7. There is no single mandatory engine speed needed to move off in every car.

8. Releasing the clutch too quickly may cause a jerk or make the engine stall.

9. Holding the clutch at the biting point for too long is not a good way to control the car.

10. In an automatic, the standard good practice is to operate the brake and the accelerator with the right foot.

11. The absence of engine noise in an electric car does not mean that the vehicle is not ready to drive.

12. The accelerator pedal and the brake should be metered, not treated like switches.

13. During normal braking, do not press the clutch automatically right from the start. When to use it depends on the situation, the gear and the vehicle's characteristics.

14. When bringing a manual car to a complete stop, the clutch must be disengaged before the engine labours and stalls.

15. There is no general rule requiring N or P to be selected in an automatic at every short stop.

16. Regenerative braking and one-pedal driving do not remove the need to be ready to use the service brake.

17. After stopping, the vehicle must remain under control and must not move on its own.

18. Deal with a stalled engine calmly: secure the vehicle, restart the engine and check your surroundings again.

19. If the car does not move off properly, do not automatically solve the problem by adding more accelerator.

20. Smoothness is important, but safety is more important.

Sources
  • Rozporządzenie Ministra Infrastruktury i Budownictwa z dnia 4 marca 2016 r. w sprawie szkolenia osób ubiegających się o uprawnienia do kierowania pojazdami, instruktorów i wykładowców, consolidated text: Dz.U. 2018 poz. 1885, as subsequently amended:
    • Annex No. 1, part I, officialTopic 2.9 — “Vehicle control techniques”,
    • Annex No. 1, part II, point 1.2 — “Moving off and driving forwards and in reverse along a traffic lane”,
    • point 1.2.1 — starting the vehicle's engine,
    • point 1.2.2 — switching on the lights appropriate for driving in road traffic,
    • point 1.2.3 — making sure it is possible to drive, ruling out the likelihood of causing a hazard and assessing the situation around the vehicle,
    • point 1.2.4 — moving off smoothly,
    • point 1.2.5 — driving forwards and in reverse along a traffic lane,
    • point 1.2.6 — stopping the vehicle before the end and the beginning of the traffic lane,
    • point 1.6 — moving off forwards on an uphill gradient — developed in M7.5.
  • Rozporządzenie Ministra Infrastruktury z dnia 11 października 2023 r., Dz.U. 2023 poz. 2317 — the current amendment to the training regulations concerns special rules for training soldiers in voluntary basic military service; no change was found to the scope of officialTopic 2.9 or to point 1.2 of the practical programme used in this lesson.
  • Rozporządzenie Ministra Infrastruktury z dnia 24 listopada 2023 r. w sprawie egzaminowania osób ubiegających się o uprawnienia do kierowania pojazdami, szkolenia, egzaminowania i uzyskiwania uprawnień przez egzaminatorów oraz wzorów dokumentów stosowanych w tych sprawach, Dz.U. 2023 poz. 2659, as subsequently amended:
    • Annex No. 1 — task “Moving off and driving forwards and in reverse along a traffic lane”,
    • criterion: starting the engine, appropriate lights, making sure it is possible to drive, assessing the situation around the vehicle,
    • criterion for moving off smoothly: releasing the parking brake if it is applied and, in a manual car, releasing the clutch gently and increasing engine speed,
    • driving smoothly forwards and in reverse and stopping at the designated place.
  • Rozporządzenie Ministra Infrastruktury z dnia 12 stycznia 2024 r., Dz.U. 2024 poz. 56 — amendment to the examination regulations; it did not change the basic Category B moving-off criteria indicated above.
  • Rozporządzenie Ministra Infrastruktury z dnia 21 maja 2025 r., Dz.U. 2025 poz. 696 — another amendment to the examination regulations; the changes in force from 2025 did not change the basic criterion of moving off smoothly used in this lesson.
  • Ustawa z dnia 20 czerwca 1997 r. — Prawo o ruchu drogowym, consolidated text Dz.U. 2024 poz. 1251, as subsequently amended:
    • Article 17(1) — definition of the situations in which joining traffic takes place, including starting to drive after parking or after a stop not resulting from traffic conditions or traffic rules,
    • Article 17(2) — the obligation to take particular caution and to give way when joining traffic,
    • Article 19(1) — the obligation to drive at a speed that ensures control of the vehicle,
    • Article 19(2) point 2 — the obligation to brake in a way that does not cause a hazard to road safety or obstruct traffic.
  • Driving-technique note:
    • the typical division of footwork in a manual car: the left foot operates the clutch, the right foot the brake and the accelerator pedal,
    • standard technique in an automatic car: the brake and the accelerator pedal are operated with the right foot,
    • the “biting point”, avoiding prolonged partial clutch engagement, metering pedal pressure and the moment of using the clutch during normal braking are elements of technique and mechanical operation, not separate rules of the road traffic law,
    • the characteristics of moving off, automatic creeping, the electric parking brake and regenerative braking depend on the vehicle's design and the manufacturer's recommendations.
  • State of the law checked in the official ELI on 22 August 2026.
↑